YUYAO DONGXIANG PLASTIC CO.,LTD.

ABS
POM
TPEE
PC/ABS
TPE
PP
PA6
PA66

BEG3 NC101

Performance item			Test condition [state]	Test method	Test data	Data unit
Physical property	Density			ISO 1183	1.243	g/cm3
	Burning residual			ISO 1172	15±2
	Water absorption rate			ISO 62	2.3	%
	Moulding shrinkage	Parallel direction		ISO 294-4	0.30
	Moulding shrinkage	Vertical direction		ISO 294-4	0.80
Mechanical properties	Hardness of the		R Ruler	ISO 2239/2	118
	Tensile strength			ISO 527	130.1	MPa
	Elongation at break			ISO 527	2.1	%
	Bending strength			ISO 178	177	MPa
	Flexural modulus			ISO 178	4739	MPa
	Notched impact strength of simply supported beam		23℃	ISO 179	78	KJ/m2
	Charpy Notched Impact Strength		23℃	ISO 179	8.6	KJ/m2
Electrical properties	Surface resistivity			IEC 60093	1012	Ω
Electrical properties	Dielectric strength			IEC 60243	22	kv/mm
Thermal property	Hot deformation temperature		1.80MPa	ISO 75	195	℃
	Melting point			ISO3461	220	℃
	Flame retardant			UL-94	HB