YUYAO DONGXIANG PLASTIC CO.,LTD.

ABS
POM
TPEE
PC/ABS
TPE
PP
PA6
PA66

B801

Performance item		Test condition [state]	Test method	Test data	Data unit
Basic performance	Saturated water absorption	24hr	ASTM D-570	8.5	%
	Water absorption rate		ASTM D-570	0.8	%
	Density		ASTM D-792	1.1	g/cm3
Physical property	Linear molding shrinkage		ASTM D-955	0.009-0.013	mm/mm
	Injection molding temperature range			225-265	℃
	Drying temperature / time			90/4-6	℃/hr
Mechanical properties	Notched impact strength of cantilever beam		ASTM D-256	13	KJ/m2
	Yield bending strength		ASTM D-790	80	Mpa
	Flexural modulus		ASTM D-790	2000	Mpa
	Elongation at break		ASTM D-638	＞35	%
	Fracture tensile strength		ASTM D-638	65	Mpa
	Hardness of the			R110
Electrical properties	Dielectric strength		ASTM D-149	20	KV/mm
Electrical properties	Surface resistivity		ASTM D-257	1013	ohm
Thermal property	Melting point			220	℃
Thermal property	Hot deformation temperature	0.45MPa/1.81MPa	ASTM D-648	160/65	℃